ID16-A-CM- Satin Chrome Finish

Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page)

ID26-A-CM- Satin Chrome Finish

Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page)

CB46A-CR - Polished Chrome 496mm

CB46A-CM - Satin Chrome Finish 496mm

Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page)

CB36A-CR - Polished Chrome 500mm

CB36A-CM - Satin Chrome Finish 500mm

Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page)

MG26-CM - Satin Chrome Finish

Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page)

CB16-KA-CR - Polished Chrome 247mm

CB16-KA-OL - Polished Brass 247mm

CB16-KA-CM - Satin Chrome 247mm

The smaller 200mm models are available on request and may be subject to addtional lead times.

Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page)

CB36B-CR - Polished Chrome 496mm

CB36B-CM - Satin Chrome Finish 496mm

Note: this product is surface mounted (Screws supplied) and does not require a separately ordered fixing kit.

For All Colombo Pull handles other than "Nice), you will need to order the fixing kit as a separate item.

There are 3 types of fixing kit:

XKIT/NP1 - Used for single face surface fixing (order 1 kit per pull handle

XKIT/PA - Used for back to back fixing (order 1 kit per pair of handles)

XKIT/PS-OL (polished Brass), XKIT/-CR (chrome), XKIT/CM (satin Chrome) - Used for through door fixing where a bolt is visible on the back of the door. Three finishes available as indicated above.