Colombo Italian Entry Pulls
|
Noa (Straight)
ID16-A-CM- Satin Chrome Finish Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
Noa (Curved)  
ID26-A-CR - Chrome Finish ID26-A-CM- Satin Chrome Finish Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
|
|
|
|
Square
MG26-CM - Satin Chrome Finish Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
Zen (Straight)
CB36A-CR - Polished Chrome 500mm CB36A-CM - Satin Chrome Finish 500mm Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
|
|
|
|
Zen (Curved)
CB46A-CR - Polished Chrome 496mm CB46A-CM - Satin Chrome Finish 496mm Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
Flesso
CB16-KA-CR - Polished Chrome 247mm CB16-KA-OL - Polished Brass 247mm CB16-KA-CM - Satin Chrome 247mm The smaller 200mm models are available on request and may be subject to addtional lead times. Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
|
|
|
|
Nice
CB36B-CR - Polished Chrome 496mm CB36B-CM - Satin Chrome Finish 496mm Note: this product is surface mounted (Screws supplied) and does not require a separately ordered fixing kit. |
Estro (offset)
CA26-A-CR - Polished Chrome 350mm CA26-A-CM - Satin Chrome 350mm CA26-A-OL - Polished Brass 350mm CA26-B-CR - Polished Chrome 250mm CA26-B-CM - Satin Chrome 250mm CA26-B-OL - Polished Brass 250mm Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
|
|
|
|
Estro (Straight)
CA16-A-CR - Polished Chrome 300mm CA16-A-CM - Satin Chrome 300mm CA16-A-OL - Polished Brass 300mm CA16-B-CR - Polished Chrome 200mm CA16-B-CM - Satin Chrome 200mm CA16-B-OL - Polished Brass 200mm Note: You will need to order the fixing kit as a separate item (see "fixing Kits" at bottom of this page) |
Fixing Kits For All Colombo Pull handles other than "Nice), you will need to order the fixing kit as a separate item. There are 3 types of fixing kit: XKIT/NP1 - Used for single face surface fixing (order 1 kit per pull handle XKIT/PA - Used for back to back fixing (order 1 kit per pair of handles) XKIT/PS-OL (polished Brass), XKIT/-CR (chrome), XKIT/CM (satin Chrome) - Used for through door fixing where a bolt is visible on the back of the door. Three finishes available as indicated above. |
|
|
|
|